본문 바로가기
PC TIP/Hackintosh

Hackintosh 메인보드 제보사 별 BIOS 세팅방법

by 하씨아재 2021. 3. 9.
728x90

안녕하세요.

하씨아재입니다.

이번포스팅 내용은 저 개인적으로 Hackintosh를 사용하고 있지만 상업적으로 구성 또는 판매 하고 있지는 않습니다.

쪽지로 Hackintosh 방법 문의 하시는분이 계셔서 설치 할때 BIOS 세팅방법 공유 하려고 합니다.

해킨에 가장 잘되는 보드 회사는 Gigabyte,Asus입니다.

- Load Optimized Defaults

- M.I.T. -> Advanced Memory Settings Extreme Memory Profile (X.M.P.) : Profile1 Auto

- BIOS -> Fast Boot : Disabled

- BIOS -> LAN PXE Boot Option ROM : Disabled

- BIOS -> Storage Boot Option Control : UEFI

- Peripherals -> Trusted Computing -> Security Device Support : Disable

- Peripherals -> Network Stack Configuration -> Network Stack : Disabled

- Peripherals -> USB Configuration -> Legacy USB Support : Auto

- Peripherals -> USB Configuration -> XHCI Hand-off : Enabled

- Chipset -> Vt-d : Disabled

- Chipset -> Wake on LAN Enable : Disabled

- Chipset -> IOAPIC 24-119 Entries : Enabled

CSM: disable

- Peripherals -> Initial Display Output : PCIe 1 Slot

- Chipset -> Integrated Graphics : Disabled

- Peripherals -> Initial Display Output : IGFX

- Chipset -> Integrated Graphics : Enabled

- Chipset -> DVMT Pre-Allocated :128Mb x Monitor 4K otherwise set 64Mb

 

- Load Optimized Defaults

- AI Tweaker \ Ai Overclock tuner -> Auto

- Advanced \ CPU Configuration -> Intel Virtualizaiton Technology: Enabled

- Advanced \ CPU Configuration -> CPU -> Power Management Control -> CFG Lock: Disabled

- Advanced \ System Agent (SA) Configuration -> Vt-d: Disabled

- Advanced \ PCH Configuration -> IOAPIC 24-119 Entries: Enabled

- Advanced \ Onboard Devices Configuration -> RGB LED Lighting -> When system is in sleep, hibernate or soft off states: OFF

- Advanced \ AMP Configuration -> Power On By PCI-E/PCI

- Advanced \ Network Stack Configuration -> Network Stack: Disabled

- Advanced \ USB Configuration -> Legacy USB Support: Auto

- Boot -> Fast Boot : Disabled

- Boot -> Secure Boot -> OS Type : Other OS

- Boot -> CSM (Compatibility Support Module) Launch CSM: Disabled

 

Scheda video dedicata dGPU:

- Advanced \ System Agent (SA) Configuration \ Graphics Configuration -> Primary Display: PCIE

- Advanced \ System Agent (SA) Configuration \ Graphics Configuration -> iGPU Multi Monitor: Disabled

 

Scheda video integrata iGPU:

- Advanced \ System Agent (SA) Configuration \ Graphics Configuration -> Primary Display: IGFX (Optional) Hardware Acceleration

- iGPU Multi-Monitor: Enabled will cause Primary Display to be set to IGFX. If you are using a dedicated graphics card change it back to PEG

- Advanced \ System Agent (SA) Configuration\Graphics Configuration -> iGPU Multi-Monitor: Enabled

- For DVMT Pre-Allocated to show in BIOS you may need to save & reenter BIOS after setting iGPU Multi-Monitor: Enabled

- Advanced \ System Agent (SA) Configuration\Graphics Configuration -> DVMT Pre-Allocated :128Mb x Monitor 4K otherwise set 64Mb

 

- Load Optimized Defaults

- OC Tweaker \ DRAM Configuration -> Load XMP Setting : XMP 2.0 Profile 1 oppure Auto

- Advanced \ CPU Configuration -> Intel Virtualization Technology : Enabled

- Advanced \ Chipset Configuration -> Vt-d : Disabled

- Advanced \ Chipset Configuration -> IOAPIC 24-119 Entries: Enabled

- Advanced \ Storage Configuration -> Sata Mode Selection: AHCI

- Advanced \ Super IO Configuration -> Serial Port: Disabled

- Advanced \ USB Configuration -> Legacy USB Support : Enabled

- Advanced \ USB Configuration -> PS/2 Simulator : Disabled

- Advanced \ USB Configuration -> XHCI Hand-off : Enabled

- Security \ Secure Boot -> Secure Boot: Disabled

- Boot -> Fast Boot: Disabled

- Boot -> Boot From Onboard LAN: Disabled

 

Scheda video integrata iGPU:

- Advanced \ Chipset Configuration -> Primary Graphics Adapter : Onboard

- Advanced \ Chipset Configuration -> Share Memory : 128Mb x Monitor 4K otherwise set 64Mb

- Advanced \ Chipset Configuration -> IGPU Multi-Monitor : Enabled

 

Scheda video dedicata dGPU:

- Advanced \ Chipset Configuration -> Primary Graphics Adapter : PCI Express

- Advanced \ Chipset Configuration -> IGPU Multi-Monitor : Disabled

 

- Save & Exit → Restore Defaults : Yes

- Settings \ Advanced \ Integrated Peripherals → Network Stack : [Disabled]

- Settings \ Advanced \Integrated Peripherals → Intel Serial IO : [Disabled]

- Settings \ Advanced \ USB Configuration → XHCI Hand-off : [Enabled]

- Settings \ Advanced \ USB Configuration → Legacy USB Support : [Auto]

- Settings \ Advanced \ Windows OS Configuration → MSI Fast Boot : [Disabled]

- Settings \ Advanced \ Windows OS Configuration → Fast Boot : [Disabled]

- Overclocking → Extreme Memory Profile(X.M.P) : [Enabled]

- Overclocking \ CPU Features → Intel Virtualization Tech : [Enabled]

- Overclocking \ CPU Features → Intel VT-D Tech : [Disabled]

- Settings \ Boot → Boot mode select : [LEGACY+UEFI] NB this setting may be linked to the CSM, so in case of problems during installation or with AMD video cards set to UEFI

- Settings \ Boot → Boot Option #1: UEFI: “macOS_flash_drive_name“

[DGPU]

Settings \ Advanced \ Integrated Graphics Configuration → Initiate Graphic Adapter : PEG

[IGPU]

Advanced \ Integrated Graphics Configuration → Initiate Graphic Adapter : IGD

- Settings \ Advanced \ Integrated Graphics Configuration → DVMT Pre-Allocated :128Mb x Monitor 4K otherwise set 64Mb

(64MB if it's the maximum you can set)

(Optional) Wake hackintosh from sleep thru Input:

Advanced \ Wake Up Event Setup → Resume By USB Device : [Enabled]

이상 Hackintosh 메인보드 제보사 별 BIOS 세팅방법이였습니다.

감사합니다.